Forum

Lawn mower blades wear out and must be replaced occasionally to ensure your lawn is looking its best. Removing blades is an simple project that takes several steps and basic tools.

The top lawn mower blades are made of strong build materials that can make sure they last for an extended time and not get worn out quickly. Blades must be strong enough to withstand the rigors of high-force.

Deck Blade

 

 

The cutting blade is the primary part of a lawnmower. It is enclosed in the deck's casing and is available in different sizes, shapes and types. Each has its own specifications, and it should be able to handle fast contact with grass as well as other items.

Standard blades have a curved surface that raises the grass and cuts it in a scissor-like action. The blade's curve also aids in dispersing clippings. This kind of blade needs less power than a high-lift blade, making it ideal for mowing on dirt or sandy terrain.

Cylinder or reel blades consist of three to seven blades that have helical design, which are joined to a cylindrical rotating reel. They're typically used on reels and gas-powered mowers. This is the most popular type and it's easy to change. The blades can be sharpened or rebalanced by many lawn care or hardware stores for a small fee.

Standard Blade

 

 

The most popular type of blade on lawn mowers is the blade that's flat. It is made to cut grass, however it does not have no special features such as bagging or mulching features. It has a low suction capacity and is suitable for all kinds of grass.

The blades of high-lift blades are angled so that they maximize airflow. This results in vertical suction that draws the grass towards the mower deck. This creates the perfect defined appearance for your lawn. The blades are also able to mowing on sandy surfaces.

When you use these Easy-to-use lawn mower blade sharpener mower blades make sure that the holes for the shear pins are properly aligned with the center bolt hole of the mower. The blade won't sit properly against the boss if it is not aligned correctly. The blade may get worn out quicker than you anticipate. It is suggested that you verify the shear pin's locations with your mower's manual for operators or the list of parts to ensure that the holes are properly fitted.

Lifting Blade

 

 

These blades are designed to circulate air around the lawn mower's deck, which helps in reducing clogging and providing a quality cut. The blades are curved inward creating a vacuum that lifts grass and then delivers it into your bagging system or to the side discharge.

The lifting effect of these blades also increases the quality of the cut when used on longer grass, where a lower lift blade may struggle to achieve an even cut. Furthermore, they are perfect for those who like to mulch lawn clippings and are compatible with the 2-in-1 or 3-in-1 blade.

These blades are only a downside if you own a lawn mower that has a strong engine. They're not recommended for use on sand or dirt terrain where grit and sand could be kicked up and deteriorate the deck of the mower faster.

Mulching Blade

 

 

A favorite choice for those who don't have bags this blade allows clippings to be discharged, mulched, or ejected through the discharge chute of your mower. It has bigger "wind wings" that are larger than the ones found on regular lawn mower blades these blades can create an efficient airflow under the grass clippings to ensure they aren't thrown into the air and are able to safely be discharged out of your mower.

To make sure that your lawn mower's mulching blade is installed correctly, check its bevel (the slope on the blade's edge that's responsible to cut) to make sure it is pointing downwards to the ground when mowing. The sharp edge of the blade could cause damage to your mower's deck if it's not properly installed. Make sure the blade isn't bent in an unnatural angle. It could be ineffective to cut taller grass. This is typically the sign of a broken blade.