<p><img class="aligncenter size-full=" src="http://www.earthpeopletechnology.com/wp-content/uploads/2022/04/EPT_5M240_FG_S2_Diagonol_Top_Left_Down_001.jpg" alt="BeeProLogic CPLD Development System" width="618" height="415" /></p>

The BeeProLogic is an Easy To Use
Beginners CPLD Development Board.

The BeeProLogic is a CPLD development board that is designed to be
user friendly and a great introduction into digital design for Electrical
Engineering students and hobbyists. This board provides a simplified method
for debugging programmable logic code. It has been designed with plenty of
LEDs and Pushbuttons to allow a large amount of interaction between user and
hardware operations.

BeeProLogic Callouts.jpg

The Earth People Technology BeeProLogic CPLD development system hardware
consists of a a CPLD, 8Mb Flash and a single channel DAC. The board requires
an external JTAG Programmer compatible with the JTAG Blaster. The Core of the
board is the MAX V chip. The board can be powered by standard USB Micro B connector.
There is a 10MHz oscillator attached to the MAX V chip for clocking user code.
The board also includes 10 Green User LEDS, Seven User Pushbuttons and One external
connector with six pins for GPIO.</td>

Hardware Features:

• MAX V 5M240ZT100 CPLD From Intel/ 240 Logic Elements
• 8 Mbit Flash Chip
• 8 bit Single Channel DAC
• 5 Inputs/Outputs available at 8x1 connector on board
• 11 Green User configurable LEDs
• 8 User Configurable Pushbutton Switch
• Power: Standard USB (+5V @ 2Amp) Using Micro-B connector
• 10MHz Oscillator
• Standard Programming Connector fits any JTAG Blaster